相关文章

搪瓷反应釜操作注意事项

下面反应釜网的小编跟大家介绍搪瓷反应釜操作注意事项。

搪瓷反应釜

加料时要慎重。不应有任何坚硬物体掉到搪瓷容器内,同时还应尽量避免空罐加热料和热罐加冷料,使用温差不应超过设备的技术指标规定。物料加入设备内应严防夹带块状金属或杂物,对于大块硬质物料,应粉碎后加入。尽量减小物料与罐壁之间的温差,避免冷罐加热料或热罐加冷料。

搪瓷反应釜

在使用有夹套的设备时,要徐徐加压升温。要预先通入0.1MP的压力,保持一刻钟后,再缓缓通入蒸气达操作压力,如果条件许可,可根据本单位的实际情况,找出适宜的升降温曲线,一般控制在3℃/min以下。设备运转中,要注意法兰、接盘、人孔及填料箱的密封情况,如发现泄漏应立即采取措施。

英文:The following reaction kettle network of small series with you to introduce enamel reaction kettle operation note.

Feeding time to be careful. Should not be any hard objects out of enamel containers, but also should try to avoid air tank heating and hot pot add cold material, the use of temperature difference should not exceed the technical specifications of the equipment. The material adding equipment to prevent internal entrainment of bulk metal or debris, for large pieces of hard materials, should be added after crushing. Try to reduce the temperature difference between the material and the tank wall, avoid the cold pot heating or hot pot add cold material.

In the use of a clip of the device, it is to slowly pressure heating. The pressure to advance into the 0.1MP, to maintain a quarter of an hour later, and then slowly through the steam up to operating pressure, if conditions permit, according to the actual situation of the unit, to find out the appropriate temperature curve, the general control in 3 C / min. In the operation of equipment, should pay attention to the flange, a connection plate, manhole and stuffing box seals, such as the discovery of leakage should take immediate measures.

Above is the enamel reaction kettle operation notes, the majority of friends have a need to reaction kettle, welcome to inquire to buy.